sale
bedCLAW Unibody Adjustable Height Bed Frame Slat Center Support Leg, U.S.A.
bedCLAW Unibody Adjustable Height Bed Fr... from $19.97 $32.99
The Benefits of a Center Support System: All beds, especially those Queen Size and larger, will benefit from the center support and bed support slat system. A Center Support supports your foundation unit and mattress in the middle, thus reducing stress on those units. Most mattress manufacturers require center support for their warranty to be valid. Wood Bed Support Slats Need Center Support Also: Many beds still use the wood slat method for supporting the mattress/foundation unit. Beds utilizing wood slats for support need added legs in the middle to prevent bowing and cracking of the slats because wood naturally changes over time. The NEW bedCLAW Unibody Adjustable Height Bed Slat Support Leg: The bedCLAW new leg features strong, one-piece unibody construction. No rivets are employed; it is made from a single piece of steel that has been formed and welded. It will protect both carpet and hard floors. We are constantly working to improve our products and bring even better value to our customers. How Many Should I Install? You may install as few or as many as you prefer. Most customers choose to use 2 or 3 support legs, each installed in the center of a wood slat along the length of the bed. Each bedCLAW Unibody leg comes with 2 adjustable height glides, along with the adjustable extenders provide you the ability to tailor the bedCLAW Unibody support to a wider range of heights when compared to other less useful support legs. The Height Adjustability is continuous from 6-1/2" to 14-3/4", with no missing range. All needed hardware, parts, screws included making this as easy as 1-2-3. Ships from High Point, NC in the U.S.A. and comes with a Lifetime Service Policy. Chinese sellers do not offer such service nor product backing. Included Hardware with Each Leg - Wing Nut - Jam Nut (the little one) - Coupler Nut (the big one) - #8-3/4" Phillips Wood Screw (4) WF Ltd. Lifetime Service Policy Our Ltd. Lifetime Policy runs from the original date of purchase and covers the repair of manufacturing defects or replacement of your purchased product. Item must be clean and free of stains or damage. Transportation charges and a Policy Service Fee are the responsibility of the consumer. To email, your clear images of the issue go to the storefront for our contact information. Then you will receive information on the next steps and/or additional information on this policy.
sale
Bed Claw SlatJack Adjustable Center Support Leg for Sagging Mattress Caused by Sagging Wooden Bed Slats, Bed Frame
Bed Claw SlatJack Adjustable Center Supp... from $35.00 $49.88
The SlatJack adjustable center support leg is designed for bed slats or furniture that needs extra strength to fix, prevent, or underpin sagging issues. Developed and designed by BED CLAW, the SlatJack acts as a jack for your bed or furniture to prevent or correct sagging. Used with wood slats on your bed, the SlatJack adds years of comfortable sleep and is the #1 solution for sagging mattresses. Using one Slat Jack in the middle of each wood bed slat is sufficient to eliminate the all to infrequent, albeit distracting, creaking sounds while providing ample mattress frame support.Each SlatJack leg comes with 2 adjustable height glides. One is 2.5" tall while the other is 5" tall.  These, especially when combined with the included adjustable extenders, provide you the ability to tailor the SlatJack to a wider range of heights when compared to other less useful support legs. If your bed is anywhere from roughly 6" to 15" off the floor the SlatJack will help provide a stable base for your bed slats to help prevent sagging.Top Mounting Plate Dimensions: 3" x 1 15/16"The large smooth plastic glide is 1 7/8" wide for excellent weight distribution. The large size helps prevent carpet and hard floor damage.Height Adjustable from 6-1/2" to 14-3/4".If your bed is between 10" to 11-1/2" tall from the floor to where the box spring rests, you'll want to utilize a combination of the extender and the shorter 2-1/2" glide included to gain access to this height range. All needed hardware, including screws, included
-41% sale
bedCLAW No-Sag Mattress Slats Center Support - Universal Size Adjusts from Full to Cali-King
bedCLAW No-Sag Mattress Slats Center Sup... $138.00 $231.00
Due to the increasing demand for a strong center support system capable of attachment to lower-height beds, the bedCLAW No-Sag Center Support System has been developed. It consists of 3 Steel Cross Rails, each with one adjustable leg.  Designed to reinforce your bed's central area, which bears about 70% of your weight. Strategically placed support helps prevent warping, broken wooden slats, and damaged side rails cleats (or lips) that hold your bedding. Included wood screws to attach this support to your wooden side rail cleats.  Though designed primarily for use with wooden side rails, this support can be used on beds with metal side rails. When used with metal side rails, it is likely that you will need to have the capability of drilling holes into your metal side rails for securing the supports into place. You'll need a power drill and a drill bit that is designed for drilling into metal.  The bedCLAW No-Sag Center Support System is easily adjustable in width and height. It will adjust in Width from 52" up to 77" to fit the following bed sizes: Full, Queen, King, and California King Size. It will adjust in height from a minimum of 4" up to a maximum of 15".  The bedCLAW No-Sag Center Support System passed the Static Load Testing of 2,000 pounds. The glides on the bottom of each of the three adjustable legs are 2" in diameter, assuring good weight distribution while protecting floors and carpeting.  Some assembly is required. Instructions are included as are tools required for assembly. Please contact us should you have any additional questions or concerns regarding this item, we are happy to assist.  Specifications:  Fits These Bed Sizes: Full, Queen, King, and California King  Adjustable Height: 4" to 15"  Weight Capacity: 2,000 pounds  Adjustable Cross Arms: 3  Adjustable Glide Equipped Legs: 3 (one per cross arm) 
-36% sale
bedCLAW Set of 4 Attachment Brackets for Trundles, Top Springs, Bunks, Day Beds
bedCLAW Set of 4 Attachment Brackets for... $38.97 $59.99
bedCLAW Universal Bracket Expedites Repairs   If your Trundle Top Spring or Daybed is missing a bracket or two, this universal Bracket will allow you to make the necessary repair.   What Is Included   FOUR Brackets (Two Left and Two Right) SIXTEEN Washers SIXTEEN Nuts EIGHT 1/4"-20 x 3-1/2" Carriage Bolts EIGHT 1/4"-20 x 1-1/2" Carriage Bolts EIGHT  1/4"-20 x 1/2" Bolts allowing easy mounting to your Bunk, Top Spring, or Daybed unit.   This bedCLAW Daybed Bracket Expedites assembly of daybed you may have lost parts on your last move or buying at flea markets or garage sale deals. We also offer a Set of 2, bedCLAW Set of 2 Attachment Brackets for Trundles, Top Springs, Bunks, Day Beds. WF Ltd. Lifetime Service Policy   What is covered? This Ltd. Lifetime Policy covers manufacturing defects in the product you purchased directly from Wallace Flynn Inc. In cases of multiple pieces, replacement of one piece does not automatically constitute the replacement of the other piece or pieces/unit. This limited policy is provided to the original purchaser. Any stains, punctures, holes, or tears created by misuse are not considered manufacturing defects.   What will we do? If your purchased product fails due to a manufacturing defect, Wallace Flynn Inc. will repair the product. Wallace Flynn Inc. reserves the right to substitute materials or models of comparable quality and does not guarantee that the item of the replacement will match the existing piece. Transportation charges are the responsibility of the consumer, along with a Policy Service Fee.   How can I get service? Please email your clear images of the issue to support. You will then receive information on the next steps and/or additional information on this policy.  
-30% sale
bedCLAW Set of 2 Attachment Brackets for Trundles, Top Springs, Bunks, Day Beds
bedCLAW Set of 2 Attachment Brackets for... $24.77 $34.95
You asked... so we brought them back! Now with more hardware options.  If your Trundle Top Spring or Daybed is missing a bracket or two, this bedCLAW Bracket will allow you to make the necessary repair allowing easy mounting to your Top Spring or Daybed unit.  What Is Included? TWO Brackets (One Left and One Right) EIGHT Washers EIGHT Nuts FOUR 1/4"-20 x 3-1/2" Carriage Bolts FOUR 1/4"-20 x 1-1/2" Carriage Bolts FOUR 1/4"-20 x 1/2" Bolts allowing easy mounting to your Bunk, Top Spring, or Daybed unit.   This bedCLAW Daybed Bracket Expedites assembly of daybed you may have lost parts on your last move or buying at flea markets or garage sale deals. We also offer a Set of 4, bedCLAW Set of 4 Attachment Brackets for Trundles, Top Springs, Bunks, Day Beds. WF Ltd. Lifetime Service Policy   What is covered? This Ltd. Lifetime Policy covers manufacturing defects in the product you purchased directly from Wallace Flynn Inc. In cases of multiple pieces, replacement of one piece does not automatically constitute the replacement of the other piece or pieces/unit. This limited policy is provided to the original purchaser. Any stains, punctures, holes, or tears created by misuse are not considered manufacturing defects.   What will we do? If your purchased product fails due to a manufacturing defect, Wallace Flynn Inc. will repair the product. Wallace Flynn Inc. reserves the right to substitute materials or models of comparable quality and does not guarantee that the item of the replacement will match the existing piece. Transportation charges are the responsibility of the consumer, along with a Policy Service Fee.   How can I get service? Please email your clear images of the issue to support. You will then receive information on the next steps and/or additional information on this policy.  
-13% sale
bedCLAW Anti-Wobble Bed Rail Shims, Set of 6 Steel Spacers
bedCLAW Anti-Wobble Bed Rail Shims, Set ... $21.87 $24.99
bedCLAW Anti-Wobble Steel Bed Rail Shims are designed for use with hook-on bed rails and bed frames as spring-like spacers. They are ideal for use with wooden beds because they allow you to "snug up" the frame and prevent wobbling, shaking, squeaks, and damage to hook connectors from excess movement. You place these between your bed and the bed rails, placing the hook connector through the slot in the shim, then simply connect your bed back together as you normally would. Work with both steel or wooden hook-on bed rails. By definition, a shim is a thin strip of material used to align parts, make them fit, or reduce wear. Depending on the gap multiple shims can be used together to provide a snug fit which can help reduce any unwanted movement or sounds being made by your bed frame. The sounds are simply two pieces of the frame moving back and forth on each other. Along with stopping the movement and sounds, properly installed shims will help reduce wear and tear since the frame will no longer be scraping against itself. Each Shim is approximately 5-1/2"L x 7/8"W Sold as a Set of 6 Shims bedCLAW Anti-Wobble Bed Rail Shims are designed for use with hook-on bed rails and bed frames. They are ideal for use with wooden beds because they allow you to "snug up" the frame and prevent wobbling, shaking, squeaks, and damage to hook connectors from excess movement. You place these between your bed and the bed rails, placing the hook connector through the slot in the shim, then simply connect your bed back together as you normally would. By definition, a shim is a thin strip of material used to align parts, make them fit, or reduce wear. In some cases, more than one shim may be needed to completely fill in a gap in your bed frame. Each Shim is approximately 5-1/2"L x 7/8"W
-33% sale
BedClaw HD Mattress Retainer Bracket, Set of 2
BedClaw HD Mattress Retainer Bracket, Se... $16.87 $24.99
The BedClaw Heavy-Duty Mattress Retainer Bracket attaches to the bed frame with the included bolt and wing nut. The Mattress Retainer Bracket is then adjusted to hold the mattress, box spring, or foundation in a stationary position on the bed frame. In some cases, the BedClaw Heavy-Duty Mattress Retainer Bracket is used by hotels to add additional brackets to bed frames or bases to hold the mattress securely in place. The BedClaw Heavy-Duty Mattress Retainer Bracket may be adjusted to the width of the mattress or foundation unit being supported by loosening the included bolt and wing nut and sliding the Mattress Retainer Bracket along the length of the internal 1/4" slot through which the bolt is inserted. Please note, if your bed frame does not have holes in the center of the rails for attaching, you will need to drill holes in your frame to facilitate installation. Our BedClaw Heavy-Duty Mattress Retainer Brackets are the perfect replacement for your conversion bed frame or other home improvement project. Each set includes 2 Heavy-Duty Brackets, 2 Bolts, and 2 Wing Nuts.
-22% sale
Bed Claw #35 Hook Plate Conversion Adapter Kit for Using a Bolt-On Frame with a Hook-On Headboard- Pack of 4
Bed Claw #35 Hook Plate Conversion Adapt... $23.49 $29.87
Adjust for Height of Headboard / Footboard ' The #35 Down Hook Bolt-On Conversion Bracket for Headboard and Footboard attachment allows the consumer to make an adjustment for height. Thus, different size headboards and footboards can be accommodated. There is no provision for width adjustment with this bracket. Adjustment Range: Vertical: 2". Note on the Vertical Adjustment Range ' The vertical adjustment dimensions are based on the bracket bolts being approximately 2 1/2" apart. Placing the bolts closer together would result in a greater vertical adjustment range, but could possibly decrease the strength of the connection. If a vertical height adjustment, within the specified range of 2" is needed, then the #35 would be the correct choice. Hooks Are Pointed Down ' The hooks on the #35 are pointed down. The #35 bracket should be used when the headboard and/or footboard can support the weight of the bed. What's Included ' The #35 Hook Plate Conversion Adapter Kit for Using a Bolt-On Frame with a Hook-On Headboard comes as a pack of 4. So, if you have a headboard and footboard to mount, you will only need one set. The #35 conversion bracket comes with 4 #35 brackets, nuts, and bolts. Please inquire should you have any questions. 
-40% sale
Bed Claw Retro-Hook Plates for Wooden Bed Rail Restoration, Set of 4 with Screws, Bed Frame
Bed Claw Retro-Hook Plates for Wooden Be... $24.00 $39.99
Application  |  The Retro-Hook Plate facilitates the installation of a hook plate to the bed rail by means of 8 included screws. This method of attachment is advantageous when the usual hook plate installation method is not available. For example, if damage to the bed rail prevents the hook plate from being installed in the usual manner, the Retro-Hook Plate may be installed by simply being screwed into the inside of the bedrail. The all new Retro Hook will allow you to screw mount this plate to the inside of your bed rail in the case that your rail does not have slots for ordinary hook plates. Heavy-Duty Construction  |  These hook plates are made with 13 gauge steel and are the standard configuration for most American made beds. Measure Carefully  |  Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart on center to determine if this hook plate will work in your application.
-28% sale
bedCLAW Queen Bed Modification Plate, Headboard Attachment Bracket, Set of 2
bedCLAW Queen Bed Modification Plate, He... $23.24 $31.99
bedCLAW Modification Plates are strong, heavy-gauge steel plates with precisely cut various combinations of slots. These Modi Plates allow you to make size modifications to your bed, including changing the headboard/footboard which can be used with certain size bed frames. The bedCLAW Queen Modification Plates attach to standard bolt-on style bed frame brackets to accommodate special needs, projects, or odd-sized headboards and footboards. This bracket is ideal for using your existing Full Size headboard with a larger Queen Size mattress or vice versa. The Queen Modi Plate will also convert King to California King. Modifications can be made with other applications as long as the size differential is within 4". Possible Uses:   - Using a Full (Double) Size Headboard/Footboard with a Queen Size Bed   - Using a California King Headboard/Footboard with an Eastern King Bed   - Making up small size differences between a standard bed frame and odd-size antiques Approximate Dimensions: 5" Wide x 5 1/4" Tall (Larger Side) x 3-7/8" Tall (Smaller Side) Comes packaged as two plates with hardware and instructions, which is enough to adapt a headboard. If you are attaching both a headboard AND a footboard, you will need two sets (for a total of four plates.) WF Ltd. Lifetime Service Policy
-62% sale
bedCLAW King Bed Bolt-On Headboard Modification Plate, Set of 2
bedCLAW King Bed Bolt-On Headboard Modif... $18.99 $49.95
bedCLAW King Modification Plates adapts standard Bolt-On Brackets to accommodate special needs, projects, or odd-sized headboards packed in pairs along with Nylock nuts with bolts. These Modification Plates work in connecting different sized headboards and bed frames or allow for specialized adaptations for your particular need or project. The Heavy Duty, 12-Gauge steel design allows you to securely connect your bed. Perfect for attaching Queen Bed Frames to King Headboards, or King Bed Frames to Queen Headboards, special projects, or those odd size headboards to fit standard bed frames, all sizes. Adapts standard Bolt-On Brackets to accommodate special needs, projects, or odd-sized headboards packed along with Nylock nuts with bolts. Approx. size is 10-1/8" wide x 4-7/8" tall. Nylock nuts (6) and bolts (6) are included with each pair to simplify attachment. Click on pictures for a larger view. Be sure to orient the plates so no excess protrudes beyond the headboard or in a way that can cause a hazard in your bedroom. LIFETIME SERVICE POLICY
-56% sale
Bed Claw #10 Hook Plates for Wooden Beds, Set of 4
Bed Claw #10 Hook Plates for Wooden Beds... $12.99 $28.99
Application  This hook plate is intended as a replacement for hook plates which have been damaged or for new bed construction where hook plate installation is desired. The hook plate will be installed on the bed rail with the hooks being inserted into the headboard/footboard in order to join the headboard/footboard to the rails.  Heavy-Duty Construction  These hook plates are made with 13 Gauge steel and are the standard configuration for most American-Made beds.  Measure Carefully  Please note the dimensions of this #10 Hook plate from the "Dimensions" illustration under More Views. Of special note is the distance of the two slot ends from each other, 2" on center. Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart on center to determine if this hook plate will work in your application. The mounting holes for the pins are 11/32" in diameter.  Mounting Pins Are Included  Mounting Pins are included with this item.
-2% sale
bedCLAW Anti-Wobble Steel Bed Rail Shims or Spacers, Set of 4
bedCLAW Anti-Wobble Steel Bed Rail Shims... $19.77 $19.99
bedCLAW Anti-Wobble Steel Bed Rail Shims are designed for use with hook-on bed rails and bed frames as spring-like spacers. They are ideal for use with wooden beds because they allow you to "snug up" the frame and prevent wobbling, shaking, squeaks, and damage to hook connectors from excess movement. You place these between your bed and the bed rails, placing the hook connector through the slot in the shim, then simply connect your bed back together as you normally would. By definition, a shim is a thin strip of material used to align parts, make them fit, or reduce wear, with steel ridges designed on each metal shim, they also act as spacers to fill gaps. Depending on the gap, multiple shims can be used together to provide a snug fit which can help reduce any unwanted movement or sounds being made by your bed frame. The sounds are simply two pieces of the frame moving back and forth on each other. Along with stopping the movement and sounds, properly installed shims will help reduce wear and tear since the frame will no longer be scraping against itself. For large gaps, alternate the stacking of the shims. Each Shim is approximately 5-1/2"L x 7/8"W Sold as a Set of 4   bedCLAW Anti-Wobble Bed Rail Shims are designed for use with hook-on bed rails and bed frames. They are ideal for use with wooden beds because they allow you to "snug up" the frame and prevent wobbling, shaking, squeaks, and damage to hook connectors from excess movement. You place these between your bed and the bed rails, placing the hook connector through the slot in the shim, then simply connect your bed back together as you normally would. By definition, a shim is a thin strip of material used to align parts, make them fit, or reduce wear. Depending on the gap multiple shims can be used together to provide a snug fit which can help reduce any unwanted movement or sounds being made by your bed frame. The sounds are simply two pieces of the frame moving back and forth on each other. Along with stopping the movement and sounds, properly installed shims will help reduce wear and tear since the frame will no longer be scraping against itself. Each Shim is approximately 5-1/2"L x 7/8"W, Sold as a Set of 4
62% sale
Bed Claw Heavy Duty Box Spring Fastener Bed Bracket, Set of 6, Ideal for Antique Bed Restoration
Bed Claw Heavy Duty Box Spring Fastener ... $64.87 $39.99
Application - These extra heavy-duty "L" brackets mount to the inside of bed rails and end boards to provide a sturdy platform for your box spring. Recommended Quantity - Two to three per side recommended, and one to two per end. How Sold - Package is sold as a set of 6 brackets. Screws not included. The bracket measure approximately 3-5/8" Long on either side, 1-1/4" Wide, and about 1/4" Thick. The three holes are 1", 2", and 3" respectively as measured from the Bottom Edge of the Bracket (Please see "The Three Holes" in the images) Construction: Steel
-30% sale
bedCLAW 76
bedCLAW 76" x 6" Twin/Full Replacement W... $189.99 $269.95
Wood bed rails provide that classic timeless beauty that the discriminating connoisseur of fine furniture demands. Whether building a new bed or restoring an older bed, wood bed rails provide beauty and warmth unmatched by any other rail system.     Exclusive bedCLAW  Wood Side Rails are a great solution for replacing broken or missing wood rails. These wood rails are laminated with top edge veneer banded faces. This process results in a wood rail which is much stronger than a solid wood rail. It is also more stable; a laminated rail will not warp or bow as a solid wood rail can.     The industry-standard hook plates incorporated into both ends of the rails will probably fit any headboard/footboard manufactured within the last 40 years. Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart from the center to determine that our rail hook plates will fit appropriately.     The price is for a pair of side rails (one for each side of the bed). Wood Rails are sold in pairs only in order to assure a correct fit. These are the same original factory rails that are supplied by many bed manufacturers. Please note, however, the color shown may not match your frame exactly.     Installing these wooden side rails along with a matching steel center support not only protects your new wood rails from bowing and breaking but also prevents your mattress from sagging and protects your mattress warranty. You will sleep more comfortably knowing that your bed is sturdy and secure. Dimensions These rails are 76 inches Long to fit Twin or Full size beds. Wood rails are approx. 6 inches tall and 1 inch wide. An inside lip runs down the inside of each rail, allowing easy and secure attachment of center support systems. WF Ltd. Lifetime Service Policy