bedCLAW Angled Retro-Hook Plates with Ha...
$22.00
$29.99
This bedCLAW Angled Retro Hook Plate mounts to wood bed rails and connects with right-angled headboard connections.
Attaches wood bed rails to headboard or footboard with right angle mounting construction.
Includes screws for attachment to wood bed rails.
Sold as a set of 2 plates (one left, one right).
Heavy-duty steel construction.
The hooks measure approximately 2-7/8" on center.
Bed Claw Replacement 82" Hook-on Wood Be...
from $216.99
$269.99
Wood Bed Rails for Beauty - Wood Bed Rails for Strength - Wood bed rails provide that classic timeless beauty that the discriminating connoisseur of fine furniture demands. Whether building a new bed or restoring an older bed, wood bed rails provide beauty and warmth unmatched by any other rail system.
Laminated Hardwood for High Strength and Beauty - Exclusive Bed Claw Wood Side Rails are a great solution for replacing broken or missing wood rails. These wood rails are laminated with top-edge veneer banded faces. This process results in a wood rail which is much stronger than a solid wood rail. It is also more stable; a laminated rail will not warp or bow like a solid wood rail.
Industry Standard Hook-Plates - The industry-standard hook plates incorporated into both ends of the rails will probably fit any headboard/footboard manufactured within the last 40 years. Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart from the center to determine that our rail hook plates will fit appropriately.
Wood Rails Sold in Pairs Only - The price is for a pair of side rails (one for each side of the bed). Wood Rails are sold in pairs only to assure a correct fit. These are the same original factory rails that are supplied by many bed manufacturers. Please note, however, the color shown may not match your frame exactly. Images are for representative photos; note that the specific rails you receive may differ slightly from the image shown here.
Dimensions -
* These rails are 82 inches Long to fit Queen or King size beds. (Will also fit Twin XL or Full XL, but not standard Twin or Full, please measure the length of your mattress)
* Wood rails are approx. 6-3/4 - 6 7/8" inches tall.
* An inside lip runs down the inside of each rail, allowing easy and secure attachment of center support systems.
Please measure your current rails before ordering.
These are for Standard Queen and King size beds, not "Sleigh" type beds.
Queen and King size "Sleigh" type beds tend to use rails that are for Standard Twin or Full size beds.
Please measure your current rails before ordering.
Please note that the images shown on this page are for representation, and the product you receive may differ slightly due to manufacturing changes. Please review the item description and detailed measurements that are provided to ensure these bed rails will work for your application.
Our WF Limited Lifetime Service Policy only covers manufacturing defects in wooden rails when subject to proper handling and normal use in conjunction with a center support system that provides continuous support. To provide continuous support, a Queen or King frame must have a rigid bridge bar with at least 3 support legs or 3 equally spaced hardwood cross-slats with a supporting center leg.
bedCLAW Anti-Wobble Steel Bed Rail Shims...
$21.52
$24.99
bedCLAW Anti-Wobble Steel Bed Rail Shims are designed for use with hook-on bed rails and bed frames as spring-like spacers. They are ideal for use with wooden beds because they allow you to "snug up" the frame and prevent wobbling, shaking, squeaks, and damage to hook connectors from excess movement. You place these between your bed and the bed rails, placing the hook connector through the slot in the shim, then simply connect your bed back together as you normally would.
By definition, a shim is a thin strip of material used to align parts, make them fit, or reduce wear, with steel ridges designed on each metal shim, they also act as spacers to fill gaps. Depending on the gap, multiple shims can be used together to provide a snug fit which can help reduce any unwanted movement or sounds being made by your bed frame. The sounds are simply two pieces of the frame moving back and forth on each other. Along with stopping the movement and sounds, properly installed shims will help reduce wear and tear since the frame will no longer be scraping against itself. For large gaps, alternate the stacking of the shims.
Each Shim is approximately 5-1/2"L x 7/8"W
Sold as a Set of 4
bedCLAW Anti-Wobble Bed Rail Shims are designed for use with hook-on bed rails and bed frames.
They are ideal for use with wooden beds because they allow you to "snug up" the frame and prevent wobbling, shaking, squeaks, and damage to hook connectors from excess movement.
You place these between your bed and the bed rails, placing the hook connector through the slot in the shim, then simply connect your bed back together as you normally would.
By definition, a shim is a thin strip of material used to align parts, make them fit, or reduce wear. Depending on the gap multiple shims can be used together to provide a snug fit which can help reduce any unwanted movement or sounds being made by your bed frame. The sounds are simply two pieces of the frame moving back and forth on each other. Along with stopping the movement and sounds, properly installed shims will help reduce wear and tear since the frame will no longer be scraping against itself.
Each Shim is approximately 5-1/2"L x 7/8"W, Sold as a Set of 4
bedCLAW 82" Steel Bolt-On Side Rails for...
$118.00
$179.99
Fits Twin XL, Full XL, Queen and King Size Mattresses (NOT STANDARD TWIN or FULL MATTRESSES, ONLY XL (EXTRA LONG)
Bedrails Need Your Headboard and Footboard - Bedrails attach to your headboard and footboard which continue to provide support for your bed. These bedrails will attach to bolt-on type headboards and footboards. They may be modified to attach to hook-on headboards/footboards through the optional hook-on accessories such as #35 Hook Plates.
Sturdy Construction and Extra-Long Length - The bed rails feature Sturdy Construction. The side rails measure 1-1/2" x 1-1/2" (vertically) x 82" long.
Included Headboard and Footboard Bolt-On Brackets - The Bolt-On Headboard and Footboard Brackets feature 1", 2-1/2" or 4" centers on the mounting slots.
Made in the USA - These rails are quality made with pride in the United States.
Special Note - Please note these rails are warehouse closeout offerings and may have cosmetic blemishes due to being moved around. Rest assured that these rails are strong, durable, and there has been no compromise to the overall functionality of the rails themselves.
The images shown on this page are for representation, and the product you receive may differ slightly due to manufacturing changes. Please review the item description and detailed measurements that are provided to ensure these rails will work for your application.
NO ADDITIONAL HARDWARE IS INCLUDED
bedCLAW Set of 2 Attachment Brackets for...
$32.87
$34.95
You asked... so we brought them back! Now with more hardware options.
If your Trundle Top Spring or Daybed is missing a bracket or two, this bedCLAW Bracket will allow you to make the necessary repair allowing easy mounting to your Top Spring or Daybed unit.
What Is Included?
TWO Brackets (One Left and One Right)
EIGHT Washers
EIGHT Nuts
FOUR 1/4"-20 x 3-1/2" Carriage Bolts
FOUR 1/4"-20 x 1-1/2" Carriage Bolts
FOUR 1/4"-20 x 1/2" Bolts
allowing easy mounting to your Bunk, Top Spring, or Daybed unit.
This bedCLAW Daybed Bracket Expedites assembly of daybed you may have lost parts on your last move or buying at flea markets or garage sale deals.
We also offer a Set of 4, bedCLAW Set of 4 Attachment Brackets for Trundles, Top Springs, Bunks, Day Beds.
WF Ltd. Lifetime Service Policy
What is covered? This Ltd. Lifetime Policy covers manufacturing defects in the product you purchased directly from Wallace Flynn Inc. In cases of multiple pieces, replacement of one piece does not automatically constitute the replacement of the other piece or pieces/unit. This limited policy is provided to the original purchaser. Any stains, punctures, holes, or tears created by misuse are not considered manufacturing defects.
What will we do? If your purchased product fails due to a manufacturing defect, Wallace Flynn Inc. will repair the product. Wallace Flynn Inc. reserves the right to substitute materials or models of comparable quality and does not guarantee that the item of the replacement will match the existing piece. Transportation charges are the responsibility of the consumer, along with a Policy Service Fee.
How can I get service? Please email your clear images of the issue to support. You will then receive information on the next steps and/or additional information on this policy.
#69 Down Hook Bolt-On to Hook-On Convers...
$22.00
$39.99
The #69 Bolt-On to Down Hook-On Bed Frame Conversion Bracket provides both vertical and/or width adjustment. The #69 bracket is almost like the #65 but, the #69 has the hooks that point down instead. #69 brackets are used when you can have your headboard on the floor, and your headboard and/or footboard can have some or all of your bed weight on it.
The #69 bracket is sold as a set of 2, so if you have a headboard and footboard, you will need two sets. The #69 conversion bracket comes with 2 #69 brackets, nuts, bolts, and screws. The #69 bracket is used when you need vertical and/or width adjustment for your bed rails to fit your headboard.
The hooks on the #69 are pointed down. The #69 bracket should be used when your headboard and/or footboard can take the weight of your bed. The #69 conversion bracket should be the one for you if you need both height and/or width adjustment.
- Converts a bolt-on bed frame to allow for a hook-on type headboard
- Allows easy conversion from bolt-on to hook-on brackets
- This product is sold in pairs. To attach your headboard AND footboard, you would need two pairs
- Approximate Measurements - Height: 7-3/8", Width: 2-3/8", Depth of Hook: 1-1/4", Overall Bracket Depth: 1-3/8"
There are 3 other types of Bolt-On to Hook-On Conversion Brackets with the included hardware:
- The #65 Adapto-Hook Bolt-on to Hook-On Conversion Brackets provide both vertical and/or width adjustment. The #65 conversion brackets are made to lift and suspend the headboard and/or footboard. If you have an older headboard that you do not want to have your bed's weight on it, the #65 should be a great match. The hooks on the #65 bracket point up instead of down like in the #69.
- The #35 Hook Plate Conversion Adapter Kit for Using a Bolt-On Frame with a Hook-On Headboard comes as a set of 4, enough for both the headboard and footboard. If you need a straight connection from the bedrail to the headboard and footboard, the #35 should be a perfect fit.
- The #711 Bolt-On to Hook-On Bed Frame Conversion Brackets provide vertical adjustment. If you need a vertical adjustment, the #711 should be the one for you.
bedCLAW #4 Curved Hook Plates for Wooden...
$11.99
bedCLAW #4 Curved Hook Plates for Wooden Beds or Crib Conversion, Set of 4
Application: This bedCLAW hook plate is intended as a replacement for hook plates that have been damaged or for new bed construction where hook plate installation is desired. The BedClaw hook plate will be installed on the bed rail with the hooks being inserted into the headboard/footboard in order to join the headboard/footboard to the rails.
Heavy-Duty Construction: These hook plates are constructed of heavy-duty 13 Gauge Steel.
Measure Carefully: Please note the dimensions of this #4 Hookplate from the "Dimensions" illustration under More Views. Of special note is the distance of the two slot ends from each other: 1-5/8" on center.
Please measure the distance from the two pins in your headboard/footboard to confirm that they are 1-5/8" apart on center to determine if this hook plate will work in your application.
bedCLAW 76" x 6" Twin/Full Replacement W...
from $199.99
$269.95
Wood bed rails provide that classic timeless beauty that the discriminating connoisseur of fine furniture demands. Whether building a new bed or restoring an older bed, wood bed rails provide beauty and warmth unmatched by any other rail system.
Exclusive bedCLAW Wood Side Rails are a great solution for replacing broken or missing wood rails. These wood rails are laminated with top edge veneer banded faces. This process results in a wood rail which is much stronger than a solid wood rail. It is also more stable; a laminated rail will not warp or bow as a solid wood rail can.
The industry-standard hook plates incorporated into both ends of the rails will probably fit any headboard/footboard manufactured within the last 40 years. Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart from the center to determine that our rail hook plates will fit appropriately.
The price is for a pair of side rails (one for each side of the bed). Wood Rails are sold in pairs only in order to assure a correct fit. These are the same original factory rails that are supplied by many bed manufacturers. Please note, however, the color shown may not match your frame exactly.
Installing these wooden side rails along with a matching steel center support not only protects your new wood rails from bowing and breaking but also prevents your mattress from sagging and protects your mattress warranty. You will sleep more comfortably knowing that your bed is sturdy and secure.
Dimensions
These rails are 76 inches Long to fit Twin or Full size beds.
Wood rails are approx. 6 inches tall and 1 inch wide.
An inside lip runs down the inside of each rail, allowing easy and secure attachment of center support systems.
WF Ltd. Lifetime Service Policy
bedCLAW Heavy-Duty Box Spring Fastener B...
$47.87
$68.99
APPLICATION: These extra heavy-duty "L" brackets mount to the inside of bed rails and end boards to provide a sturdy platform for your box spring.
RECOMMENDED QUANTITY: Two to three per side recommended, and one to two per end.
HOW SOLD: Sold as a set of 4 brackets. Mount with #14 screws. Screws are not included.
CONSTRUCTION: Power Coated Steel.
The bracket measures approximately 3-5/8" Long on either side, 1-1/4" Wide, and about 1/4" Thick. These are quite heavy-duty and weigh almost a pound each! Making them ideal for many projects like using to restore antique beds or furniture.
The three holes are 1", 2", and 3" respectively as measured from the Bottom Edge of the Bracket (Please see "The Three Holes" in the images).
Proudly made in the United States.
bedCLAW Universal Bed Frame Footboard At...
$38.99
$45.99
Don't be fooled by cheaper imitations. The original bedCLAW is not only extremely heavy-duty, but it is also proudly made in the U.S.A. and comes with our Lifetime Service Policy.
Function: These footboard brackets attach to your existing headboard-only style bed frame allowing you to attach a bolt-on footboard. Our footboard brackets only work on bed frames that have holes in the side rails for bolting on the footboard brackets; otherwise, some drilling may be required.
Universal Footboard Attachment Design: The bedCLAW Universal Footboard Attachment Kit has been designed to be adjustable and will fit Twin, Full, Queen, or King Size Beds.
Included Items
(2) Two 13" Long Universal Extension Rails;
(2) Two Bolt-On Footboard Brackets;
(8) Eight Hex Bolts and
(8) Eight Locking Tensi-Nuts to attach the extension rails to your Bed Frame and to attach the headboard brackets to the extension rails;
(4) Four 3-1/2" Bolts,
(4) Four Nuts, and
(4) Four Washers for attaching the bracket to your footboard; Instructions.
Installation Procedure (Instructions are included in the box)
- The purchaser should position the extension rail over-lapping their current steel bed frame rail and select the bolt holes which provide the amount of extension needed for their bed. If your bed frame does not have holes at the end, or they do not match the provided dimensions, you will need to drill holes in your frame to facilitate installation.
- Install Extension Rail using the included Hex Bolts and Locking Tensi Nuts
- Attach the footboard brackets using the included Washers, Hex Bolts, and Locking Tensi-Nuts
- Attach the footboard to the footboard brackets using the included 3-1/2" Bolts, Washers, and Nuts
Large Plastic Bed Frame Insert Plugs, 7/...
$13.99
$19.95
How Sold: This item is sold in sets of four. Thus, selecting a quantity of 1 will result in 1 set of 4 plugs being ordered. Selecting a quantity of 3 will result in 3 sets of four plugs in each set (12 plugs total) being ordered.
Approximate Dimensions:
1-13/16" tall
7/8" shaft exterior top diameter
15/16" shaft exterior bottom diameter
Bottom Flange Diameter: 31/32"
7/16" center hole
1 7/8" stem length
bedCLAW Heavy-Duty Box Spring Fastener B...
$67.87
$77.09
Application: These extra heavy-duty "L" brackets mount to the inside of bed rails and end boards to provide a sturdy platform for your box spring.
Recommended Quantity: Two to three per side recommended, and one to two per end.
How Sold: Sold as a set of 6 brackets. Mount with #12 screws. Screws are not included.
The bracket measures approximately 3-3/4" Long on either side, 1-5/8" Wide, and about 6mm Thick. The three holes are each spaced 1" apart.
These are quite heavy-duty and weigh almost a pound each! Making it ideal for many projects like using to restore antique beds or furniture.
Construction: Powder Coated Rolled Steel.
All measurements are approx.
Bedlok 4-3/4" Recessed Mount Bed Hook Br...
$32.99
$42.99
Application: Single recessed bed hook bracket. Installs into your bedpost and has a hook slot in the middle to allow attachment of your bed rails. The bracket recesses into your headboard or footboard to allow flush mounting of your rails with your bed.
Construction: The bracket is 4-3/4" tall and includes several holes for mounting. 12 gauge Steel construction, brown finish.
Note: The "Single" designation in the title means that this bracket has one attachment point for a hook-on rail. The bracket is not limited to a particular size of the bed.
Features:
Strong 12 gauge steel construction
Multiple pre-drilled holes for wood screws facilitate installation.
Design permits flush mounting of bed rails Brown finish
Dimensions (All measurements are approximate)
4-3/4" High
1-1/4" Deep
1-5/8" Wide (Outside Flange)
Recessed Slot Inside Width: 1/8"
Wide Recessed Slot Outside Width: 3/8" Wide
Can be used with wood or metal bed rails that have a double hook with 2" spacing.
Heavy 12 Gauge Steel Made in the USA. Parts Only.
No screws, instructions, or diagrams included. Brown Primer Painted, scratches, paint drips may be found.
Under most conditions, this bracket is not visible when the bed is assembled and the mattress installed.
bedCLAW Headboard/Footboard Attachment B...
$34.87
$45.99
The bedCLAW Headboard/Footboard Attachment Brackets are durable, steel brackets that allow you to connect your bolt-on style headboard or footboard to a metal bed frame.
Included with each set is:
(2) Attachment Brackets
(4) Hex Bolts
(4) Locking Tensi-Nuts
(4) Washers
bedCLAW SlatJack Adjustable Center Suppo...
from $37.00
$50.00
The SlatJack adjustable center support leg is designed for bed slats or furniture that needs extra strength to fix, prevent, or underpin sagging issues. Developed and designed by bedCLAW, the SlatJack acts as a jack for your bed or furniture to prevent or correct sagging. Used with wood slats on your bed, the SlatJack adds years of comfortable sleep and is the #1 solution for sagging mattresses. Using one Slat Jack in the middle of each wood bed slat is sufficient to eliminate the all too infrequent, albeit distracting, creaking sounds while providing ample mattress frame support. Above-average height and weight sleepers may require further SlatJacks to insure integrity.
Each SlatJack leg comes with 2 adjustable height glides. One is 2.5" tall while the other is 5" tall. These, especially when combined with the included adjustable extenders, provide you the ability to tailor the SlatJack to a wider range of heights when compared to other less useful support legs. If your bed is anywhere from roughly 6" to 15" off the floor the SlatJack will help provide a stable base for your bed slats to help prevent sagging. Top Mounting Plate Dimensions: 3" x 1 15/16"The large smooth plastic glide is 1-7/8" wide for excellent weight distribution. The large size helps prevent carpet and hard floor damage. Height Adjustable from 6-1/2" to 14-3/4". If your bed is between 10" to 11-1/2" tall from the floor to where the box spring rests, you'll want to utilize a combination of the extender and the shorter 2-1/2" glide included to gain access to this height range. All needed hardware, including screws, included.
