Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, and the oil is burned off to clean the metal and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use. Type: Metal Wall Art Colors: Metallic Materials: Upcycled Steel Metal Finish: Lacquer Dimensions: Approx. 14" x 16" Care: If displaying outdoors it is recommended to spray with a clear lacquer once or twice a year, as prolonged exposure to the elements will cause rust. Hanging Instructions: To hang metal art simply use pinhead nails in the many nooks and spaces available in the design. If nails are shiny, you may want to darken heads with a black marker to help nails visually disappear. Given the handmade nature of this product please allow for minor variations. As the metal is recovered from recycled oil drums and colored through a burning process it will vary slightly in coloration. Typically the piece has a darkened steel patina. If hand-painted, exact colors may vary, which speaks to the one-of-a-kind nature of each piece. Each piece of metal art whether painted or natural is coated with a layer of clear lacquer to help protect the metal.

This piece of Haitian metal wall art is 24 inches in diameter. It features a tree of life with birds, hand-cut, embossed, and painted. When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, and leaving a raised, reversed signature on the front. We deliver socially responsible products curated for you from over 20 countries. Be part of the solution.

This piece of Haitian metal wall art is 24 inches in diameter. It features two large fish jumping, hand-cut, embossed, and painted. When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, and leaving a raised, reversed signature on the front. We deliver socially responsible products curated for you from over 20 countries. Be part of the solution.

This piece features an angel and moon in a traditional Haitian design. Hand-cut and embossed, this piece is 24 inches in diameter. When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, and leaving a raised, reversed signature on the front. We deliver socially responsible products curated for you from over 20 countries. Be part of the solution.

Haitian artisans hand cut and embossed from steel oil drums this 11-by-12-inch piece depicting a bird. With a high-gloss varnish, this piece is perfect for hanging indoors or out. When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, and leaving a raised, reversed signature on the front. We deliver socially responsible products curated for you from over 20 countries. Be part of the solution.

This gecko is handmade in Haiti from recycled oil drums. Each has a small hook to hang the piece and is painted with a bright colorful design inspired by the local Haitian culture. From head to tail, the gecko is 8 inches long. Founded in 1990 by a multinational group of young entrepreneurs, Caribbean Craft promotes employment in Haiti by training unskilled craftspeople, and by assisting independent artisans through the introduction of new designs and new market outlets for painted Haitian metal art. Caribbean Craft's specialty is the brightly colored, artistically hand-painted Haitian metal art wall hangings. These hand-painted Haitian metal art pieces are truly works of art. Wall art designs include painted metal geckos, painted metal dragonflies, and painted metal frogs. We deliver socially responsible products curated for you from over 20 countries. Be part of the solution.

Depicting a Tree of Life, this piece is handcrafted from steel drums in Haiti. It is 14 inches in diameter. Suitable for indoor or outdoor use. When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, and leaving a raised, reversed signature on the front. We deliver socially responsible products curated for you from over 20 countries. Be part of the solution.

Depicting a Tree of Life, this piece is handcrafted from steel drums in Haiti. It is 14 inches in diameter and suitable for indoor or outdoor use. When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, and leaving a raised, reversed signature on the front. We deliver socially responsible products curated for you from over 20 countries. Be part of the solution.

This 24-inch Haitian metal wall art features a colorful fish and conch shell. Perfect for hanging indoors or out, the piece is hand painted, hand cut, and embossed. When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, and leaving a raised, reversed signature on the front. We deliver socially responsible products curated for you from over 20 countries. Be part of the solution.

This piece features a pair of owls on a perch design in this traditional Haitian design. Hand-cut and embossed, this piece is 23 inches in diameter. When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, and leaving a raised, reversed signature on the front. We deliver socially responsible products curated for you from over 20 countries. Be part of the solution.

This piece features a tree of life framed in a ring in this traditional Haitian design. Hand-cut and embossed, this piece is 23 inches in diameter. When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, and leaving a raised, reversed signature on the front. We deliver socially responsible products curated for you from over 20 countries. Be part of the solution.