Air Dream ULTRA sleeper sofa mattress Replacement Wired Hand Control/Wand Only PLEASE NOTE: The Air Dream ULTRA Parts are designed specifically for the Air Dream ULTRA mattress only and are not to be used with any other mattress. We do not recommend the Air Dream as an everyday mattress - only for occasional guest use. 

Application: These hanger bolts can be used to retrofit wooden sofa legs to fit your Metric M10 socket or the M10 T-Nut. The coarse wood threads screw into the wooden sofa leg, and the fine machine threads are Metric M10 size for easy installation into your furniture via a Metric M10 T-Nut. If your T-Nut is damaged or missing, but the installation site itself is still sound, a replacement T-Nut would enable the installation. How Sold: These hanger bolts come as pictured, without any additional hardware or instructions. If purchased with sofa legs, they will be bagged separately in the package and you will need to install the bolts into the legs yourself. Sold as a Set of 6: Selecting a quantity of 1 will result in 1 set of 6 hanger bolts being ordered. Selecting a quantity of 2 will result in 2 sets of 6 hanger bolts in each set or 12 hanger bolts being ordered. Before You Order: Prior to ordering, please ensure the sofa legs you will install these in have a minimum height of 1-1/2" of wood into which the coarse wood screw can be threaded. Overall Bolt Length: 2-1/2" Fine Thread Length: 1-1/8" Coarse Thread Length: 1-3/8" Made in the U.S.A. and not imported!

It's always about uncompromising quality. Patient, exacting, and artistic. Exquisite work forged by generations of experience, done only by hand, to the time-honored excellence of multi-generational craftsmen. Using all of their tactile senses: smelling, feeling, and viewing each skin ensures that each Corsa Miglia glove is made to the highest standard. Italian driving gloves are a utilitarian work of art.Fit is most important for driving gloves, most drivers desire a proper, snug fit. A well-cut glove should not lengthen but must be able to expand enough to allow a convenient introduction of the hand and subsequent reshaping for a conforming, bespoke fit. Points such as knuckles and phalanxes should always mold exactly to the individual hand, hence the proverbial expression, FITS LIKE A GLOVE.Once the choice hides are selected, the cutting of the glove is performed with the same craftsmanship that has served as the gold standard for over a hundred years. Careful manual measurement calculates the degree of elasticity, which varies from skin to skin, as well as inside the same skin, depending on the anatomical part considered.CORSA MIGLIA continues to maintain the history and artistry of producing gloves in Italy, by hand. A lifetime investment- a lifetime Service Policy.Glove Sizes: We offer 4 sizes in each of our gloves in order to offer a fit for any sized hand. To measure, wrap a measuring tape around your hand just under your knuckles and with your thumb extended out. See the image in our photo gallery. Please note that if you find yourself between sizes we recommend ordering the smaller size. Over time the glove will form to your hand for a perfect fit.

PLEASE BE AWARE: PER THE MANUFACTURER, THERE IS AN APPROX 4-6 WEEK LEAD TIME. You have probably heard about the "everything shortage," with many consumer and commercial goods being in short supply due to historic congestion at seaports, disruption in interstate shipping, and leading to increases in the cost of goods and shipping. At the same time, shipping carriers such as USPS, UPS, and FedEx are also raising their rates, suspending delivery date guarantees, and delaying service. This will only get worse. Our mechanisms are hand-crafted right here in High Point, NC, so we are not affected as much by these challenges. Still, the raw steel and spring stock we depend on continues to be unpredictable. Some components may be affected by the global shipping delays and supply shortages. Shipping orders out to you, our valued customers, can also be impacted by these and other factors. We have never encountered such problems in the thirty-one years we have been supplying the industry, but material shortages are possible this winter. Because of today's unpredictable realities, we are recommending that you place your mechanism order as quickly as possible to avoid delays. We appreciate your patience as we work through these challenges with our customers. The 900 sleeper mechanism by Hickory Springs is the entry-level sleeper in the Overnighter Series that is exclusively designed for residential use. Tubular and fabricated angle construction - provides maximum strength and holds the mattress within the desired sleep cavity. Headlock™ locking TV headrest system - prevents bed from being closed and damaged with raised headrest. Synchronized pivotal action hinge - allows for smoother operation and eliminates sliding parts which could damage bedding. Also allows for maximum clearance of upholstered arms while opening and closing the sleeper. Nylon washers in critical rivet joints - reduce wear and ensure easy operation. Smooth Exposed Edges - Prevent upholstery damage or consumer injury. One-piece front leg system - Ensures a consistent seat pitch from side to side. Positive locking leg tube - This allows the unit to be opened easily from either side of the mechanism. Contoured "saddle seat" in the seat section provides added consumer comfort. Dark charcoal, baked-on enamel finish - provides a more aesthetic appearance and coordinates with any fabric or leather color. Sleeper Cavity - accommodates either 5" innerspring or foam mattress. Tilt Forward feature - Allows for easy cleaning under the sofa. • Manufactured in the USA • Designed for strength and performance • Mounts in a standard cavity sofa frame • Double BedSecure™ Safety Feature keeps unit stationery and the legs secure for support • Crosswires in seat and shoulder sections provide additional support • 12 gauge helical springs which provide less stretching around the perimeter in hospitality environments. (Please be advised this item may have an extended lead time. These items are shipped curbside freight and additional freight charges may apply especially for orders outside of the contiguous USA.)

PLEASE BE AWARE: PER THE MANUFACTURER, THERE IS AN APPROX 2-4-WEEK LEAD TIME. You have probably heard about the "everything shortage," with many consumer and commercial goods being in short supply due to historic congestion at seaports, disruption in interstate shipping, and leading increases in the cost of goods and shipping. At the same time, shipping carriers such as USPS, UPS, and FedEx are also raising their rates, suspending delivery date guarantees, and delaying service. This will only get worse. Our mechanisms are hand-crafted right here in High Point, NC, so we are not affected as much by these challenges. Still, the raw steel and spring stock we depend on continues to be unpredictable. Some components may be affected by global shipping delays and supply shortages. Shipping orders out to you, our valued customers, can also be impacted by these and other factors. We have never encountered such problems in the thirty-one years we have been supplying the industry, but material shortages are possible this winter. Because of today's unpredictable realities, we are recommending that you place your mechanism order as quickly as possible to avoid delays. We appreciate your patience as we work through these challenges with our customers. Replace damaged, rusted, worn-out, or unsafe sleeper units with a new Made-in-USA Replacement Sleeper Sofa Mechanism which features squared tubular construction that's safe, strong, and well designed. When sleeper sofa mechanisms break, they can become uncomfortable, non-working, or worse, dangerous. Wallace Flynn offers many different replacement sleeper sofa mechanisms. Repair it, don't replace it. If you're unsure, please contact us before ordering to ensure proper sizing. The strongest sleeper mechanism made, the Classic 3500 Series contract sofa sleeper system features an engineered low-profile linkage to keep all metal parts below the mattress line. Its all-squared tubular frame construction provides improved safety and comfort in the seated position. The Classic 3500 Series from Wallace Flynn is a series of sofa sleeper mechanisms engineered with low-profile linkage to keep all metal parts below the mattress line. These mechanisms are easy to operate, and their all-squared tubular frame construction provides a smooth and visually appealing look. The Classic 3500 Series offers improved safety by eliminating pinch points, and the comfort in the seated position has been enhanced as well. When ordering a replacement mechanism for your sofa, finding the manufacturer and model number information for the existing mechanism is very important. This ensures that you receive the correct fit for replacement. This model replaces the Leggett and Platt 3500 Classic Series mechanisms. Alternately, if the label is difficult to read, you can measure the distance between the brackets where the unit mounts into the wooden frame inside the sofa. Please look for the Leggett model number sticker on your current mechanism and match it to the model number below. The model number of your current mechanism is the only accurate way to ensure a correct replacement. Please reference the chart below to find your model number. Please contact us before ordering to ensure proper sizing. All sleeper mechanisms are made in the USA. Available in the Following Widths: Size - Model 44" - 3544, 4435 48" - 3548, 4835 55" - 3555, 5535 60" - 3560, 6035 68" - 3568, 6835 WET BAN™ Ultra Smart Mattress™ technology with silver ion-based antimicrobial technology is now available in both Sleeper Sofa and regular luxury mattresses. Our EXCLUSIVE WET BAN mattresses are the perfect solution for assuring your guests that their stay will be a pleasurable and safe one. Our ticking is antimicrobial, stain-resistant, water-resistant, durable, and easily cleaned. Robust stain-fighting protection with antimicrobial properties that work to minimize the growth of mold, mildew, and a broad spectrum of odor-causing bacteria provide superior protection. Your mattress stays cleaner and fresher longer for your guests while giving them comfort and the assurance of a protected stay. EPA-registered encapsulated silver ion technology is the cutting edge of sleep cleanliness assurance. The comfort you have come to rely on from all our mattresses remains uncompromised. Because all the protections are seamlessly woven directly into the mattress fabric, there is no need for an uncomfortable cover. Ideal for hotels, rentals, condos, beach houses, camps, RVs, Airbnbs, luxury suites, and homes throughout the world. ​The durability and comfort features of this mattress make it ideal for use in private and public facilities. The only choice for use in public facilities to meet disinfection and cleaning standards because WET BAN™ is engineered to reduce contamination while maintaining comfort. Able to meet all institutional sleep product requirements in any custom-designed mattress environment. Mattresses with built-in Stain Repellent and Antimicrobial protection. WET BAN™ mattresses are engineered to help reduce contamination while maintaining comfort. ​Environmental Impact • Does not contain PFOS (perfluoro octane sulfonate) PFOA (perfluorooctanoic acid) ​• No Proposition 65 chemicals present • No REACH listed chemicals (Substances of Very High Concern) • No EPA-regulated Section 313 chemicals present • Low VOCs (Volatile Organic Compounds) • No formaldehyde, phthalates, heavy metals, bisphenol BPA, or dioxin • No Halogenated Flame Retardants (i.e. PBDEs) • PVC free ANTIMICROBIAL • STAIN-RESISTANT • WATER-RESISTANT • DURABLE • EASILY CLEANED

bedCLAW Universal Bracket Expedites Repairs   If your Trundle Top Spring or Daybed is missing a bracket or two, this universal Bracket will allow you to make the necessary repair.   What Is Included   FOUR Brackets (Two Left and Two Right) SIXTEEN Washers SIXTEEN Nuts EIGHT 1/4"-20 x 3-1/2" Carriage Bolts EIGHT 1/4"-20 x 1-1/2" Carriage Bolts EIGHT  1/4"-20 x 1/2" Bolts allowing easy mounting to your Bunk, Top Spring, or Daybed unit.   This bedCLAW Daybed Bracket Expedites assembly of daybed you may have lost parts on your last move or buying at flea markets or garage sale deals. We also offer a Set of 2, bedCLAW Set of 2 Attachment Brackets for Trundles, Top Springs, Bunks, Day Beds. WF Ltd. Lifetime Service Policy   What is covered? This Ltd. Lifetime Policy covers manufacturing defects in the product you purchased directly from Wallace Flynn Inc. In cases of multiple pieces, replacement of one piece does not automatically constitute the replacement of the other piece or pieces/unit. This limited policy is provided to the original purchaser. Any stains, punctures, holes, or tears created by misuse are not considered manufacturing defects.   What will we do? If your purchased product fails due to a manufacturing defect, Wallace Flynn Inc. will repair the product. Wallace Flynn Inc. reserves the right to substitute materials or models of comparable quality and does not guarantee that the item of the replacement will match the existing piece. Transportation charges are the responsibility of the consumer, along with a Policy Service Fee.   How can I get service? Please email your clear images of the issue to support. You will then receive information on the next steps and/or additional information on this policy.  

Wood bed rails provide that classic timeless beauty that the discriminating connoisseur of fine furniture demands. Whether building a new bed or restoring an older bed, wood bed rails provide beauty and warmth unmatched by any other rail system.  Exclusive Bed Claw Wood Side Rails are a great solution for replacing broken or missing wood rails. These wood rails are laminated with top edge veneer banded faces. This process results in a wood rail which is much stronger than a solid wood rail. It is also more stable; a laminated rail will not warp or bow as a solid wood rail can.  The industry-standard hook plates incorporated into both ends of the rails will probably fit any headboard/footboard manufactured within the last 40 years. Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart from the center to determine that our rail hook plates will fit appropriately. These are the same original factory rails that are supplied by many bed manufacturers. Please note, however, the color shown vary screen to screen and may not match your frame exactly. An inside lip runs down the inside of each rail for the box spring to rest or allowing easy and secure attachment of center support systems. Sold as a Set of 2 (one for each side of the bed) Rails measure approximately 76" Long (no including the protruding hooks), 6" Tall, and 13/16" Wide

PLEASE BE AWARE: PER THE MANUFACTURER, THERE IS AN APPROX 2-4-WEEK LEAD TIME. You have probably heard about the "everything shortage," with many consumer and commercial goods being in short supply due to historic congestion at seaports, disruption in interstate shipping, and leading to increases in the cost of goods and shipping. At the same time, shipping carriers such as USPS, UPS, and FedEx are also raising their rates, suspending delivery date guarantees, and delaying service. This will only get worse. Our mechanisms are hand-crafted right here in High Point, NC, so we are not affected as much by these challenges. Still, the raw steel and spring stock we depend on continues to be unpredictable. Some components may be affected by the global shipping delays and supply shortages. Shipping orders out to you, our valued customers, can also be impacted by these and other factors. We have never encountered such problems in the thirty-one years we have been supplying the industry, but material shortages are possible this winter. Because of today's unpredictable realities, we are recommending that you place your mechanism order as quickly as possible to avoid delays. We appreciate your patience as we work through these challenges with our customers. Replace damaged, rusted, worn-out, or unsafe sleeper units with a new Made-in-USA Replacement Sleeper Sofa Mechanism which features round tubular construction that's safe, strong, well designed. When sleeper sofa mechanisms break, they can become uncomfortable, non-working, or worse, dangerous.  Wallace Flynn offers many different replacement sleeper sofa mechanisms. Repair it, don't replace it.  Please contact us before ordering to ensure proper sizing. The Max 2500 Series residential sofa sleeper system features engineered low-profile linkage to keep all metal parts below the mattress line. Its all-round tubular frame construction provides improved safety and comfort in the seated position. The Max 2500 Series from Wallace Flynn is a series of sofa sleeper mechanisms engineered with low-profile linkage to keep all metal parts below the mattress line. These mechanisms are easy to operate, and their all-round tubular frame construction provides a smooth and visually appealing look. The Max 2500 Series offers improved safety by eliminating pinch points, and the comfort in the seated position has been enhanced as well. When ordering a replacement mechanism for your sofa, finding the manufacturer and model number information for the existing mechanism is very important. This ensures that you receive the correct fit for replacement. This model replaces the Leggett and Platt 2500 Max Series mechanisms. Alternately, if the label is difficult to read, you can measure the distance between the brackets where the unit mounts into the wooden frame inside the sofa.  Please look for the Leggett model number sticker on your current mechanism and match it to the model number below. The model number of your current mechanism is the only accurate way to ensure a correct replacement. Please reference the chart below to find your model number. Available in the Following Widths: Size / Model 31" / 2531, 3125 40" / 2540, 4025 44" / 2544, 4425 48" / 2548, 4825 60" / 2560, 6025 67" / 2567, 6725 68" / 2568, 6825 Please contact us before ordering to ensure proper sizing.

Approximate Dimensions Height (incl. glide): 6" Top Width: 3-6/16" Bottom Width: 2-5/16" Material Type: Wood Each leg is installed with a Hanger Bolt and is easy to remove and attach. The leg is simply turned to the left to remove and to the right to install. Choosing the correct Hanger Bolt size is vital to ensure a correct fit. There are three available sizes of Hanger Bolts.  Please carefully check the hanger bolt size on your present leg to ensure that your new legs will be compatible. •The 5/16" bolt is the most common size, especially in American-made furniture. •M8 (8mm) bolts are typically seen on Swedish furniture, as well as some other imported items. •M10 (10mm) is seen on other European imports, especially those from Italy. You can reference the images for the difference between the 5/16" and M10 bolts. 5/16" and M8 look almost the same, with the difference being the type of thread. Be sure to check the fit with a bolt or nut, and not just with a tape measure or ruler. The three sizes of hanger bolts are NOT cross-compatible, so please check carefully before ordering. If you are uncertain which size Hanger Bolt you need, please call for assistance. We also offer a Hanger Bolt Fit Test Kit that provides you the opportunity to test an actual 5/16", Metric M8 hanger bolt, and a Metric M10 hanger bolt to determine which fits your needs. Our sofa legs are not just for the sofa. They also fit well and look well on chairs, ottomans, and other furniture items. Your entire sofa, chair, ottoman, and other furniture pieces rest on the leg. If the leg is loose or otherwise defective, the result can be an uncomfortable use of the furniture. Defective legs can lead to structural damage to the furniture because of uneven stress loads being placed on the frame. It is important, not only for appearance's sake but also for the well-being of your furniture to keep the legs in good repair. Even if your legs are still in good condition, you may wish to add new legs for function or appearance's sake. Purchasing longer legs than are presently installed will raise the height of the furniture item from the floor. Of course, shorter legs will lower the height. An easy cost, effective way to alter the style of your furniture is with the installation of new legs. There are many styles, colors, and finishes from which to choose. This leg is attached to the furniture item with a 5/16" hanger bolt (other sizes available). Attachment and removal of the leg are easy. The leg is simply turned to the right to install and to the left to remove. This wooden leg is beautifully finished in a walnut finish which highlights the grain beautifully. The wood is strong and durable and is equipped with a plastic glide on the bottom of the leg. Please note that wood grows in a forest in the form of trees; it is not manufactured in a factory like plastic. As a result, every wooden chair leg is unique, with naturally-occurring variations in color, texture, and grain pattern. The color and variation of the grain are one of the distinguishing features of wood and make it highly sought after as a material for sofa legs and fine furniture. Because wood is a natural material, each couch leg may differ slightly from the photographic representation shown on the website. *Quantity Pricing is available, please inquire. Item Number: 125*BF-496FRW-WALNUT

Approximate Dimensions Height: 4" Top Width: 3-3/4" Bottom Width: 2-1/2" Material Type: Wood MEASUREMENT NOTE: You will need about 2 inches of space around the bolt installation hole to avoid it from sticking out from under your furniture. These legs are attached with the included bolts. Installation is easy and best with another person to help you. Turn the sofa onto its back to allow access to the legs. Do not tilt the sofa backward with the legs still on the ground, this can damage the attachment holes. Lift the sofa cleanly off the ground before laying it down. Grasp the old leg and turn counterclockwise to unscrew the leg. Please note, the bolts and supposed to be a part of the old leg, not the sofa. If the bolt stayed in your sofa when you removed the legs, you'll need pliers to remove that bolt. Grab the new legs and included bolts. First, try screwing in just the bolt to ensure it is the correct size and will thread properly. Then, insert the bolt through the bottom of the new leg and screw it into the sofa frame with a Phillips screwdriver. Carefully thread the bolts of the new legs into the sofa and tighten until snug with the Phillips screwdriver. Turn the couch back over, remembering to lift the sofa, and set it back up for use. Choosing the Correct Bolt Size: There are three available sizes of Bolts. Please carefully check the bolt size on your present leg to ensure that your new legs will be compatible. The 5/16" bolt is the most common size in American-Made furniture. M8 (8mm) bolts are typically seen on IKEA furniture and some other imported items. M10 (10mm) is seen on other European imports like Natuzzi. You can reference the pictures to see the difference between the 5/16" and M10 bolts, by utilizing a Bic pen. 5/16" and M8 look almost the same, with the difference being the type of thread. Be sure to check the fit with a bolt or nut, and not just with a tape measure or ruler. Rulers are not recommended for measuring. The best option is to size your current bolt at a local hardware store. The three sizes of bolts are NOT cross-compatible, so please check carefully before ordering. If you are uncertain which size Bolt you need, please call for assistance. Our sofa legs are not just for the sofa. They also fit well and look well on chairs, ottomans, and any other furniture items. Your entire sofa, chair, ottoman, and other furniture pieces rest on the leg. If the leg is loose or otherwise defective, the result can be an uncomfortable use of the furniture. Defective legs can lead to structural damage to the furniture because of uneven stress loads being placed on the frame. It is important, not only for appearance sake but also for the well-being of your furniture to keep the legs in good repair. Even if your legs are still in good condition, you may wish to add new legs for function or appearance sake. Purchasing longer legs than are presently installed will raise the height of the furniture item from the floor. Of course, shorter legs will lower the height. An easy cost, effective way to alter the style of your furniture is with the installation of new legs. There are many styles, colors, and finishes from which to choose. Please note that wood grows in a forest in the form of trees; it is not manufactured in a factory like plastic. As a result, every wooden chair leg is unique, with naturally occurring variations in color, texture, and grain pattern. The color and variation of the grain is one of the distinguishing features of wood and makes it highly sought after as a material for sofa legs and fine furniture. Because wood is a natural material, each couch leg may differ slightly from the photographic representation shown.

PLEASE BE AWARE: PER THE MANUFACTURER, THERE IS AN APPROX 2-4-WEEK LEAD TIME. You have probably heard about the "everything shortage," with many consumer and commercial goods being in short supply due to historic congestion at seaports, disruption in interstate shipping, and leading increases in the cost of goods and shipping. At the same time, shipping carriers such as USPS, UPS, and FedEx are also raising their rates, suspending delivery date guarantees, and delaying service. This will only get worse. Our mechanisms are hand-crafted right here in High Point, NC, so we are not affected as much by these challenges. Still, the raw steel and spring stock we depend on continues to be unpredictable. Some components may be affected by the global shipping delays and supply shortages. Shipping orders out to you, our valued customers, can also be impacted by these and other factors. We have never encountered such problems in the thirty-one years we have been supplying the industry, but material shortages are possible this winter. Because of today's unpredictable realities, we are recommending that you place your mechanism order as quickly as possible to avoid delays. We appreciate your patience as we work through these challenges with our customers. Replace damaged, rusted, worn-out, or unsafe sleeper units with a new Made-in-USA Replacement Sleeper Sofa Mechanism which features round tubular construction that's safe, strong, and well designed. When sleeper sofa mechanisms break, they can become uncomfortable, non-working, or worse, dangerous. Wallace Flynn offers many different replacement sleeper sofa mechanisms. Repair it, don't replace it. Please contact us before ordering to ensure proper sizing. The Max 2500 Series residential sofa sleeper system features an engineered low-profile linkage to keep all metal parts below the mattress line. Its all-round tubular frame construction provides improved safety and comfort in the seated position. The Max 2500 Series from Wallace Flynn is a series of sofa sleeper mechanisms engineered with low-profile linkage to keep all metal parts below the mattress line. These mechanisms are easy to operate, and their all-round tubular frame construction provides a smooth and visually appealing look. The Max 2500 Series offers improved safety by eliminating pinch points, and the comfort in the seated position has been enhanced as well. When ordering a replacement mechanism for your sofa, finding the manufacturer and model number information for the existing mechanism is very important. This ensures that you receive the correct fit for replacement. This model replaces the Leggett and Platt 2500 Max Series mechanisms. Alternately, if the label is difficult to read, you can measure the distance between the brackets where the unit mounts into the wooden frame inside the sofa. Please look for the Leggett model number sticker on your current mechanism and match it to the model number below. The model number of your current mechanism is the only accurate way to ensure a correct replacement. Please reference the chart below to find your model number. Please contact us before ordering to ensure proper sizing. Available in the Following Widths: Size / Model 31" / 2531, 3125 40" / 2540, 4025 44" / 2544, 4425 48" / 2548, 4825 60" / 2560, 6025 67" / 2567, 6725 68" / 2568, 6825 WET BAN™ Ultra Smart Mattress™ technology with silver ion-based antimicrobial technology is now available in both Sleeper Sofa and regular luxury mattresses. Our EXCLUSIVE WET BAN mattresses are the perfect solution for assuring your guests that their stay will be a pleasurable and safe one. Our ticking is antimicrobial, stain-resistant, water-resistant, durable, and easily cleaned. Robust stain-fighting protection with antimicrobial properties that work to minimize the growth of mold, mildew, and a broad spectrum of odor-causing bacteria provide superior protection. Your mattress stays cleaner and fresher longer for your guests while giving them comfort and the assurance of a protected stay. EPA-registered encapsulated silver ion technology is the cutting edge of sleep cleanliness assurance. The comfort you have come to rely on from all our mattresses remains uncompromised. Because all the protections are seamlessly woven directly into the mattress fabric, there is no need for an uncomfortable cover. Ideal for hotels, rentals, condos, beach houses, camps, RVs, Airbnbs, luxury suites, and homes throughout the world. ​The durability and comfort features of this mattress make it ideal for use in private and public facilities. The only choice for use in public facilities to meet disinfection and cleaning standards because WET BAN™ is engineered to reduce contamination while maintaining comfort. Able to meet all institutional sleep product requirements in any custom-designed mattress environment. Mattresses with built-in Stain Repellent and Antimicrobial protection. WET BAN™ mattresses are engineered to help reduce contamination while maintaining comfort. ​Environmental Impact • Does not contain PFOS (perfluoro octane sulfonate) PFOA (perfluorooctanoic acid) ​• No Proposition 65 chemicals present • No REACH listed chemicals (Substances of Very High Concern) • No EPA-regulated Section 313 chemicals present • Low VOCs (Volatile Organic Compounds) • No formaldehyde, phthalates, heavy metals, bisphenol BPA, or dioxin • No Halogenated Flame Retardants (i.e. PBDEs) • PVC free TWIN • 32" x 72" x 6" FULL • 52" x 72" x 6" QUEEN • 60" x 72" x 6" ANTIMICROBIAL • STAIN-RESISTANT • WATER-RESISTANT • DURABLE • EASILY CLEANED

New, innovative universal repair parts for broken hook plates or split wood ends, offset for proper alignment into headboards or footboards. This bracket set is suitable for repairing broken rails on beds that employ a hook-on rail system. Because of the offset, the hooks can be put in the center of the rail's end (s). This allows the rail to be positioned similarly to the original and preserves the face of the rails flat with headboards and footboards. It will also not affect the location of the slat supports. For most applications, this is a far superior option over a flat plate or bracket. Each plate requires five 3/4" wood screws to firmly attach. Lifetime Service Policy! 2.5mm Thickened Steel - Heavy Duty steel, with super strong bearing capacity, can carry more than 300 lbs. for each bracket, makes the bed firmer, not easy to shake, and provides you with a safe bed. Wide Range of Uses- The bedCLAW® Wood Bed Rail Renovation Brackets for Bed Repairs and Replacements are made to repair missing or broken hook plates, split wood, or new bed constructions that need hook plates to line up properly. Fits most wooden bed rails and has a five-hole configuration for a secure connection. Lifetime Service Policy. Offset to properly line up the hooks to install like OEM brackets. Special surface technology - Powder coated for longer life. Smooth processing and rounded corners do not hurt hands. Dimensions - Thickness: 2.5mm Q235 Steel, 3-3/4" wide, 3-5/8" high, 2" hook separation. Universal wood bed claw hook plates are intended as a replacement for hook plates that have been damaged or for new bed construction where hook plate installation is desired. 5 Hole Design is fit for most American wooden headboard footboard frames. The wood bed rail Hook Plates are designed for use with beds that utilize 2" On Center pin spacing. It is designed to fit all sizes of bed frames, bed posts, Bed rails, footboards, headboards, and King, Queen, Full, or Twin-size beds. Wood bed rail brackets are made from durable, high-quality steel coated with zinc for rust and corrosion resistance *No wooden side rails are included. Shown only as a demonstration. 

By popular demand, we are now offering these Male Angle Tongues, which work with the Model #910 Sofa Snap Brackets! These small tabs are oftentimes broken while moving furniture.  If the female half of your Sofa Snap bracket still works (the "forks"), there is no need to replace the entire unit. Simply, replace just the broken or missing tabs.  These pieces come packaged as a set of 3, as pictured, and include screws for installation. They install on the bottom of your sofa to match up with the female half of a #910 Sofa Snap bracket. Once connected, you can separate the pieces of your sectional by lifting the half which has the male bracket installed on it. 

Approx. Height: 7-1/4" including glide Approx. Top Width: 2-3/8" Approx. Bottom Width: 1-1/2" Hanger Bolt: 5/16", M8, or M10 Our sofa legs are not just for the sofa. Your entire sofa, chair, ottoman, and other furniture pieces rest on the leg. If the leg is loose or defective, the result can be uncomfortable. Defective legs can lead to structural damage to the furniture because of uneven stress loads being placed on the frame. It is important for the well-being of your furniture to keep the legs in good repair. Even if your legs are still in good condition, you may wish to add new legs for function or appearance's sake. Obviously, purchasing taller legs than those that are presently installed will raise the height of the furniture from the floor, and of course, shorter legs will lower the height. An easy cost, effective way to alter the style of your furniture is with the installation of new legs. There are many styles, colors, and finishes from which to choose. Each leg is installed with a Hanger Bolt and is easy to remove and attach. The leg is simply turned to the left to remove and to the right to install. Choosing the correct Hanger Bolt size is vital to ensure a correct fit. There are three available sizes of Hanger Bolts.  Please carefully check the hanger bolt size on your present leg to ensure that your new legs will be compatible. •The 5/16" bolt is the most common size, especially in American-made furniture. •M8 (8mm) bolts are typically seen on Swedish furniture, as well as some other imported items. •M10 (10mm) is seen on other European imports, especially those from Italy. You can reference the images for the difference between the 5/16" and M10 bolts. 5/16" and M8 look almost the same, with the difference being the type of thread. Be sure to check the fit with a bolt or nut, and not just with a tape measure or ruler. The three sizes of hanger bolts are NOT cross-compatible, so please check carefully before ordering. If you are uncertain which size Hanger Bolt you need, please call for assistance. We also offer a Hanger Bolt Fit Test Kit that provides you the opportunity to test an actual 5/16", Metric M8 hanger bolt, and Metric M10 hanger bolt to determine which fits your needs. Please note that wood grows in a forest in the form of trees; it is not manufactured in a factory like plastic. As a result, every leg is unique with naturally occurring variations in color, texture, and grain pattern. These distinguishing features contribute highly as to why wood is sought after as a material for sofa legs and fine furniture. Because wood is a natural material, each may differ slightly from the photographic representation shown on the website.

T-Plate Purpose: Designed for attaching sofa legs to new or damaged sofas, couches, love seats, and ottomans. These plates have 5/16" threaded centers for easily attaching hanger-bolt style legs. They attach to your sofa with four screws placed directly into the wood frame of the couch.  The Solution for Damaged Hangar Bolt Sofa Leg Attachment Points: If your sofa is so damaged that a T-Nut will not attach to your sofa, we recommend the T-Plate Sofa Leg Attachment Plate. This plate installs on your sofa over the old T-Nut hole. These plates have 5/16" threaded centers for easily attaching hanger-bolt style legs. They attach to your sofa with four screws placed directly into the wood frame of the couch. Your standard 5/16" hanger bolt sofa leg will then screw into the threaded 5/16" center of the T-Plate.  Can Be Used in Place of T-Nuts: If your existing T-Nuts have worked loose and your legs won't stay in place, this is a great option for repairing the sofa and keeping your legs in place.  Designed for attaching sofa legs to new or damaged sofas, couches, love seats, and ottomans.  Plates measure 2" by 2" and are approx.1/4" deep. Plates have 5/16"-18 threaded attachment holes for Hanger Bolts.  Ideal for attaching Leg Daddy Sofa Legs to your furniture. Screws are included.  T-Plates are needed when attachment points on sofas are so damaged, the T-Nut cannot be installed.  If your sofa uses M10 (Metric 10mm) bolts, these plates allow you to use standard 5/16".