sale
Bed Claw SlatJack Adjustable Center Support Leg for Sagging Mattress Caused by Sagging Wooden Bed Slats, Bed Frame
Bed Claw SlatJack Adjustable Center Supp... from $35.00 $49.88
The SlatJack adjustable center support leg is designed for bed slats or furniture that needs extra strength to fix, prevent, or underpin sagging issues. Developed and designed by BED CLAW, the SlatJack acts as a jack for your bed or furniture to prevent or correct sagging. Used with wood slats on your bed, the SlatJack adds years of comfortable sleep and is the #1 solution for sagging mattresses. Using one Slat Jack in the middle of each wood bed slat is sufficient to eliminate the all to infrequent, albeit distracting, creaking sounds while providing ample mattress frame support.Each SlatJack leg comes with 2 adjustable height glides. One is 2.5" tall while the other is 5" tall.  These, especially when combined with the included adjustable extenders, provide you the ability to tailor the SlatJack to a wider range of heights when compared to other less useful support legs. If your bed is anywhere from roughly 6" to 15" off the floor the SlatJack will help provide a stable base for your bed slats to help prevent sagging.Top Mounting Plate Dimensions: 3" x 1 15/16"The large smooth plastic glide is 1 7/8" wide for excellent weight distribution. The large size helps prevent carpet and hard floor damage.Height Adjustable from 6-1/2" to 14-3/4".If your bed is between 10" to 11-1/2" tall from the floor to where the box spring rests, you'll want to utilize a combination of the extender and the shorter 2-1/2" glide included to gain access to this height range. All needed hardware, including screws, included
sale
Max 2500 Series Replacement Sleeper Sofa Mechanism
Max 2500 Series Replacement Sleeper Sofa... from $661.00 $892.00
PLEASE BE AWARE: PER THE MANUFACTURER, THERE IS AN APPROX 6-WEEK LEAD TIME. You have probably heard about the "everything shortage," with many consumer and commercial goods being in short supply due to historic congestion at seaports, disruption in interstate shipping, and leading to increases in the cost of goods and shipping. At the same time, shipping carriers such as USPS, UPS, and FedEx are also raising their rates, suspending delivery date guarantees, and delaying service. This will only get worse. Our mechanisms are hand-crafted right here in High Point, NC, so we are not affected as much by these challenges. Still, the raw steel and spring stock we depend on continues to be unpredictable. Some components may be affected by the global shipping delays and supply shortages. Shipping orders out to you, our valued customers, can also be impacted by these and other factors. We have never encountered such problems in the thirty-one years we have been supplying the industry, but material shortages are possible this winter. Because of today's unpredictable realities, we are recommending that you place your mechanism order as quickly as possible to avoid delays. We appreciate your patience as we work through these challenges with our customers. Replace damaged, rusted, worn-out, or unsafe sleeper units with a new Made-in-USA Replacement Sleeper Sofa Mechanism which features round tubular construction that's safe, strong, well designed. When sleeper sofa mechanisms break, they can become uncomfortable, non-working, or worse, dangerous.  Wallace Flynn offers many different replacement sleeper sofa mechanisms. Repair it, don't replace it.  Please contact us before ordering to ensure proper sizing. The Max 2500 Series residential sofa sleeper system features engineered low-profile linkage to keep all metal parts below the mattress line. Its all-round tubular frame construction provides improved safety and comfort in the seated position. The Max 2500 Series from Wallace Flynn is a series of sofa sleeper mechanisms engineered with low-profile linkage to keep all metal parts below the mattress line. These mechanisms are easy to operate, and their all-round tubular frame construction provides a smooth and visually appealing look. The Max 2500 Series offers improved safety by eliminating pinch points, and the comfort in the seated position has been enhanced as well. When ordering a replacement mechanism for your sofa, finding the manufacturer and model number information for the existing mechanism is very important. This ensures that you receive the correct fit for replacement. This model replaces the Leggett and Platt 2500 Max Series mechanisms. Alternately, if the label is difficult to read, you can measure the distance between the brackets where the unit mounts into the wooden frame inside the sofa.  Please look for the Leggett model number sticker on your current mechanism and match it to the model number below. The model number of your current mechanism is the only accurate way to ensure a correct replacement. Please reference the chart below to find your model number. Available in the Following Widths: Size / Model 31" / 2531, 3125 44" / 2544, 4425 48" / 2548, 4825 60" / 2560, 6025 67" / 2567, 6725 68" / 2568, 6825 Please contact us before ordering to ensure proper sizing.
-13% sale
bedCLAW Anti-Wobble Bed Rail Shims, Set of 6 Steel Spacers
bedCLAW Anti-Wobble Bed Rail Shims, Set ... $21.87 $24.99
bedCLAW Anti-Wobble  Steel Bed Rail Shims are designed for use with hook-on bed rails and bed frames as spring-like spacers. They are ideal for use with wooden beds because they allow you to "snug up" the frame and prevent wobbling, shaking, squeaks, and damage to hook connectors from excess movement. You place these between your bed and the bed rails, placing the hook connector through the slot in the shim, then simply connect your bed back together as you normally would. Work with both steel or wooden hook-on bed rails. By definition, a shim is a thin strip of material used to align parts, make them fit, or reduce wear. Depending on the gap multiple shims can be used together to provide a snug fit which can help reduce any unwanted movement or sounds being made by your bed frame. The sounds are simply two pieces of the frame moving back and forth on each other. Along with stopping the movement and sounds, properly installed shims will help reduce wear and tear since the frame will no longer be scraping against itself. Each Shim is approximately 5-1/2"L x 7/8"W Sold as a Set of 6 Shims   bedCLAW Anti-Wobble Bed Rail Shims are designed for use with hook-on bed rails and bed frames. They are ideal for use with wooden beds because they allow you to "snug up" the frame and prevent wobbling, shaking, squeaks, and damage to hook connectors from excess movement. You place these between your bed and the bed rails, placing the hook connector through the slot in the shim, then simply connect your bed back together as you normally would. By definition, a shim is a thin strip of material used to align parts, make them fit, or reduce wear. In some cases, more than one shim may be needed to completely fill in a gap in your bed frame. Each Shim is approximately 5-1/2"L x 7/8"W
-10% sale
Bed Claw No Sag Mattress Slats - Center Support - Universal Size Adjusts from Full to Cal King
Bed Claw No Sag Mattress Slats - Center ... $136.00 $149.99
Special Note  |  Please review the item description and detailed measurements that are provided to ensure this product will work for your application, as center supports are non-returnable.  New Adjustable Bed Rail Center Support System  |  Due to increasing demand for a strong center support system capable of attachment to lower height beds, the Hospitality No-Sag Center Mattress Support has been developed. It consists of 3 Steel Cross Rails, each with one adjustable Glide equipped leg.  Adjustable  |  The Hospitality No-Sag Center Mattress Support is easily adjustable in width and height. It will adjust in Width from 52" up to 77" to fit the following bed sizes: Full, Queen, California King, and King Size. It will adjust in height from a minimum of 4" up to a maximum of 15".  Weight Capacity  |  The Hospitality No-Sag Center Mattress Support passed the Static Load Testing of 2,000 pounds. The glide on the bottom of each of the three adjustable legs is 2" in diameter, assuring good weight distribution while protecting floors and carpeting.  Rail Attachment  |  This center support system may be attached to either wooden bed side rails or metal bed frame rails. Depending on the metal rails to which attachment is to be made, some drilling may be necessary for the attachment.  Some Assembly Required  |  Some assembly is required. Illustrated Assembly Instructions are included as are tools required for assembly.  Specifications  Fits These Bed Sizes: Full, Queen, California King, and King Size  Adjustable Height: 4" to 15"  Weight Capacity: 2,000 pounds  Number of Adjustable Cross Arms: 3  Number of Adjustable Glide Equipped Legs: 3 (one on each cross arm) 
sale
Classic Square 3500 Series Heavy-Duty Replacement Sleeper Sofa Mechanism
Classic Square 3500 Series Heavy-Duty Re... from $879.00 $1,186.00
PLEASE BE AWARE: PER THE MANUFACTURER, THERE IS AN APPROX 6-WEEK LEAD TIME. You have probably heard about the "everything shortage," with many consumer and commercial goods being in short supply due to historic congestion at seaports, disruption in interstate shipping, and leading to increases in the cost of goods and shipping. At the same time, shipping carriers such as USPS, UPS, and FedEx are also raising their rates, suspending delivery date guarantees, and delaying service. This will only get worse. Our mechanisms are hand-crafted right here in High Point, NC, so we are not affected as much by these challenges. Still, the raw steel and spring stock we depend on continues to be unpredictable. Some components may be affected by the global shipping delays and supply shortages. Shipping orders out to you, our valued customers, can also be impacted by these and other factors. We have never encountered such problems in the thirty-one years we have been supplying the industry, but material shortages are possible this winter. Because of today's unpredictable realities, we are recommending that you place your mechanism order as quickly as possible to avoid delays. We appreciate your patience as we work through these challenges with our customers. Replace damaged, rusted, worn-out, or unsafe sleeper units with a new Made-in-USA Replacement Sleeper Sofa Mechanism which feature squared tubular construction that's safe, strong, well designed. When sleeper sofa mechanisms break, they can become uncomfortable, non-working, or worse, dangerous.  Wallace Flynn offers many different replacement sleeper sofa mechanisms. Repair it, don't replace it.  Please contact us before ordering to ensure proper sizing. The Classic Square sofa sleeper system includes engineered low-profile linkage along with body-support tubes and wires for enhanced support. It eliminates sagging and the two-ply ballistic decking material enhances durability and visual appeal. The Classic Square Sleeper mechanism is a heavy-duty contract/residential sofa sleeper system with a number of features and benefits to ensure comfort and durability. The Classic Square is considered the easiest to operate in the industry and is engineered with low-profile linkage to keep all metal parts below the mattress line. Its all-square tubular frame construction provides a smooth and visually appealing look with improved safety (eliminated pinch points) and comfort in the seated position. The dual one-piece tubular legs also provide enhanced stability and strength, making this one of the highest quality products on the market. When ordering a replacement mechanism for your sofa, finding the manufacturer and model number information for the existing mechanism is very important. This ensures that you receive the correct fit for replacement. This model replaces the Leggett and Platt 3500 Classic Square Series mechanisms. Alternately, if the label is difficult to read, you can measure the distance between the brackets where the unit mounts into the wooden frame inside the sofa.  Please look for the Leggett model number sticker on your current mechanism and match it to the model number below. The model number of your current mechanism is the only accurate way to ensure a correct replacement. Please reference the chart below to find your model number. Available in the Following Widths: Size / Model 44" / 3544, 4435 48" / 3548, 4835 55" / 3555, 5535 60" / 3560, 6035 68" / 3568, 6835 Please contact us before ordering to ensure proper sizing.  All sleeper mechanisms are made in the USA
-29% sale
Bed Claw Heavy-Duty Hook-On 82
Bed Claw Heavy-Duty Hook-On 82" x 6" Rep... $199.99 $279.95
Wood Bed Rails for Beauty - Wood Bed Rails for Strength - Wood bed rails provide that classic timeless beauty that the discriminating connoisseur of fine furniture demands. Whether building a new bed or restoring an older bed, wood bed rails provide beauty and warmth unmatched by any other rail system. Laminated Hardwood for High Strength and Beauty - Exclusive bedCLAW Wood Side Rails are a great solution for replacing broken or missing wood rails. These wood rails are laminated with top edge veneer banded faces. This process results in a wood rail which is much stronger than a solid wood rail. It is also more stable; a laminated rail will not warp or bow as a solid wood rail can. Industry Standard Hook-Plates - The industry-standard hook plates incorporated into both ends of the rails will probably fit any headboard/footboard manufactured within the last 40 years. Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart from the center to determine that our rail hook plates will fit appropriately. Wood Rails Sold in Pairs Only - Price is for a pair of side rails (one for each side of the bed). Wood Rails are sold in pairs only in order to assure a correct fit. These are the same original factory rails that are supplied by many bed manufacturers. Please note, however, the color shown may not match your frame exactly. Images are for representative photo's and do note that the specific rails you receive may differ slightly from the image shown here. Dimensions -  * These rails are 82 inches Long to fit Queen or King size beds. (Will also fit Twin XL or Full XL, but not standard Twin or Full, please measure the length of your mattress) * Wood rails are approx. 6 inches tall. * An inside lip runs down the inside of each rail, allowing easy and secure attachment of center support systems. Return Policy - Please note that the images shown on this page are for representation, and the product you receive may differ slightly due to manufacturing changes. Please review the item description and detailed measurements which are provided to ensure these bed rails will work for your application, as bed rails are non-returnable.
sale
Classic 3500 Series Heavy-Duty Replacement Sleeper Sofa Mechanism with 6
Classic 3500 Series Heavy-Duty Replaceme... from $1,139.00 $1,537.00
PLEASE BE AWARE: PER THE MANUFACTURER, THERE IS AN APPROX 6-WEEK LEAD TIME. You have probably heard about the "everything shortage," with many consumer and commercial goods being in short supply due to historic congestion at seaports, disruption in interstate shipping, and leading to increases in the cost of goods and shipping. At the same time, shipping carriers such as USPS, UPS, and FedEx are also raising their rates, suspending delivery date guarantees, and delaying service. This will only get worse. Our mechanisms are hand-crafted right here in High Point, NC, so we are not affected as much by these challenges. Still, the raw steel and spring stock we depend on continues to be unpredictable. Some components may be affected by the global shipping delays and supply shortages. Shipping orders out to you, our valued customers, can also be impacted by these and other factors. We have never encountered such problems in the thirty-one years we have been supplying the industry, but material shortages are possible this winter. Because of today's unpredictable realities, we are recommending that you place your mechanism order as quickly as possible to avoid delays. We appreciate your patience as we work through these challenges with our customers. Replace damaged, rusted, worn-out, or unsafe sleeper units with a new Made-in-USA Replacement Sleeper Sofa Mechanism which features squared tubular construction that's safe, strong, well designed. When sleeper sofa mechanisms break, they can become uncomfortable, non-working, or worse, dangerous.  Wallace Flynn offers many different replacement sleeper sofa mechanisms. Repair it, don't replace it.  Please contact us before ordering to ensure proper sizing. The Classic 3500 Series contract sofa sleeper system features engineered low-profile linkage to keep all metal parts below the mattress line. Its all-squared tubular frame construction provides improved safety and comfort in the seated position. The Classic 3500 Series from Wallace Flynn is a series of sofa sleeper mechanisms engineered with low-profile linkage to keep all metal parts below the mattress line. These mechanisms are easy to operate, and their all-squared tubular frame construction provides a smooth and visually appealing look. The Classic 3500 Series offers improved safety by eliminating pinch points, and the comfort in the seated position has been enhanced as well. When ordering a replacement mechanism for your sofa, finding the manufacturer and model number information for the existing mechanism is very important. This ensures that you receive the correct fit for replacement. This model replaces the Leggett and Platt 3500 Classic Series mechanisms. Alternately, if the label is difficult to read, you can measure the distance between the brackets where the unit mounts into the wooden frame inside the sofa.  Please look for the Leggett model number sticker on your current mechanism and match it to the model number below. The model number of your current mechanism is the only accurate way to ensure a correct replacement. Please reference the chart below to find your model number. Available in the Following Widths: Size - Model 44" - 3544, 4435 48" - 3548, 4835 55" - 3555, 5535 60" - 3560, 6035 68" - 3568, 6835 Please contact us before ordering to ensure proper sizing. All sleeper mechanisms are made in the USA
Sold out sale
Hospitality Bed Max 2500 Leggett & Platt Sleeper Sofa Repair Kit
Hospitality Bed Max 2500 Leggett & Platt... from $189.95 $269.99
The sleeper sofa repair kit does not include the sleeper sofa replacement mechanism. Most often, sleeper sofas just require the replacement of the polypropylene deck that supports the mattress. Each kit contains a replacement polypropylene deck along with helical springs for perimeter attachment of the deck to the old sleeper sofa mechanism. If the original sleeper sofa mechanism is still in good working order, it is more cost-effective and easier to just replace the polypropylene deck. Designed for the Leggett & Platt Max Plus Sleeper Sofa The Hospitality Bed Max 2500 Leggett & Platt Sleeper Sofa Repair Kits are designed to fit the Leggett & Platt MAX PLUS brand. Components sizes vary by width and can accommodate both residential and contract markets. Contract markets include hotels, motels, and resorts. Model Number Information  Please look for the Leggett model number sticker on your current mechanism and match it to the model number below. The model number of your current mechanism is the only accurate way to ensure a correct replacement. Please reference the chart below to find your model number. Available in the Following Widths: Size : Model Number 44" Twin : 1544, 2544, 2744, 4415, 4425, 4427 48" Twin : 1548, 2548, 2748, 4815, 4825, 4827 55" Full : 1555, 2555, 2755, 5515, 5525, 5527 60" Full : 1560, 2560, 2760, 6015, 6025, 6027 67" Queen : 1567, 2567, 2767, 6715, 6725, 6727 68" Queen : 1568, 2568, 2768, 6815, 6825, 6827 If you cannot find your manufacturer or model number information or are not sure which kit you need, please contact us.
-29% sale
Bed Claw 13 Inch Steel Universal Bed Frame Extension Rails, 1.5
Bed Claw 13 Inch Steel Universal Bed Fra... $19.87 $27.95
Add Additional Length to Your Bed Frame Extension Rails enable your current bed frame to accommodate a larger mattress, accept a footboard, and have other uses as well.  NEW Universal Model: This is a new and improved version of our old Extension Rail. The Universal Extension Rail has 8 holes and 5 slots on each side whereas the old rail only had 4 holes on one side. The new model offers vastly improved bedframe attachment flexibility and adaptability.  Attachment Method: Pre-drilled holes and slots in each extension facilitate attachment to your present bedframe.  If your bed frame does not have holes at the end, or they do not match the provided dimensions, you will need to drill holes in your frame to facilitate installation. Set of 2: The Extension Rails are sold as a set of 2.  Special Note: Please note that the images shown on this page are for representation, and the product you receive may differ slightly due to manufacturing changes. Please review the item description and detailed measurements that are provided to ensure this frame will work for your application.
Sold out -41% sale
bedCLAW 82
bedCLAW 82" Hook-On Bed Rails for Twin X... $118.00 $199.99
SHIPPED BARE TO SAVE ON TREES.  These bedCLAW bed rails attach to your headboard and footboard which continue to provide support for your bed. These bedCLAW bed rails will attach to hook-on type headboards and footboard. The bed rails feature very sturdy construction. The side rails measure 1-1/2" x 1-1/2" (vertically) x 82" long x 12 gauge. They also feature a black finish. These rails are quality made with pride in the United States under strict quality control guidelines.  Features:  Versatile: Twin XL, Full XL, Queen, and King in Size.  Rail Length: 82" (Overall Length does not include the hooks which are inserted into the headboard/footboard).  Included Hook-On Headboard & Footboard Brackets.  Sturdy Construction: 1.5" x 1.5" x 82" x 12 gauge side rails.  Quality Made In the United States.  Please inquire should you have any questions or concerns.
-34% sale
Bed Claw Angled Retro-Hook Plates, Set of 2 with Hardware, Restore Wooden Bed Frame Side Rails
Bed Claw Angled Retro-Hook Plates, Set o... $20.00 $29.99
This Bed Claw Angled Retro Hook Plate mounts to wood bed rails and connects with right-angled headboard connections.   Attaches wood bed rails to headboard or footboard with right angle mounting construction.   Includes screws for attachment to wood bed rails.   Sold as a set of 2 plates (one left, one right).   Heavy-duty steel construction.   Hook measure approximately 2-7/8" on center. 
Sold out -20% sale
Bed Claw Replacement 82
Bed Claw Replacement 82" Hook-on Wood Be... $218.00 $269.99
Wood Bed Rails for Beauty - Wood Bed Rails for Strength - Wood bed rails provide that classic timeless beauty that the discriminating connoisseur of fine furniture demands. Whether building a new bed or restoring an older bed, wood bed rails provide beauty and warmth unmatched by any other rail system. Laminated Hardwood for High Strength and Beauty - Exclusive Bed Claw Wood Side Rails are a great solution for replacing broken or missing wood rails. These wood rails are laminated with top edge veneer banded faces. This process results in a wood rail which is much stronger than a solid wood rail. It is also more stable; a laminated rail will not warp or bow as a solid wood rail can. Industry Standard Hook-Plates - The industry-standard hook plates incorporated into both ends of the rails will probably fit any headboard/footboard manufactured within the last 40 years. Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart from the center to determine that our rail hook plates will fit appropriately. Wood Rails Sold in Pairs Only - Price is for a pair of side rails (one for each side of the bed). Wood Rails are sold in pairs only in order to assure a correct fit. These are the same original factory rails that are supplied by many bed manufacturers. Please note, however, the color shown may not match your frame exactly. Images are for representative photos and do note that the specific rails you receive may differ slightly from the image shown here. Dimensions -  * These rails are 82 inches Long to fit Queen or King size beds. (Will also fit Twin XL or Full XL, but not standard Twin or Full, please measure the length of your mattress) * Wood rails are approx. 6-3/4 - 6 7/8" inches tall. * An inside lip runs down the inside of each rail, allowing easy and secure attachment of center support systems. Please note that the images shown on this page are for representation, and the product you receive may differ slightly due to manufacturing changes. Please review the item description and detailed measurements that are provided to ensure these bed rails will work for your application.
-40% sale
Bed Claw Retro-Hook Plates for Wooden Bed Rail Restoration, Set of 4 with Screws, Bed Frame
Bed Claw Retro-Hook Plates for Wooden Be... $24.00 $39.99
Application  |  The Retro-Hook Plate facilitates the installation of a hook plate to the bed rail by means of 8 included screws. This method of attachment is advantageous when the usual hook plate installation method is not available. For example, if damage to the bed rail prevents the hook plate from being installed in the usual manner, the Retro-Hook Plate may be installed by simply being screwed into the inside of the bedrail. The all new Retro Hook will allow you to screw mount this plate to the inside of your bed rail in the case that your rail does not have slots for ordinary hook plates. Heavy-Duty Construction  |  These hook plates are made with 13 gauge steel and are the standard configuration for most American made beds. Measure Carefully  |  Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart on center to determine if this hook plate will work in your application.
sale
Leg Daddy 7
Leg Daddy 7" Dark Walnut Tapered Pyramid... from $30.00 $59.99
Approx. Height: 7-1/4" including glide Approx. Top Width: 2-3/8" Approx. Bottom Width: 1-1/2" Hanger Bolt: 5/16", M8, or M10 Our sofa legs are not just for the sofa. They also fit well and look well on chairs, ottomans, and other furniture items. Your entire sofa, chair, ottoman, and other furniture pieces rest on the leg. If the leg is loose or defective, the result can be an uncomfortable use of the furniture. Defective legs can lead to structural damage to furniture items because of uneven stress loads placed on the frame. It is important, not only for appearance but also for the well-being of your furniture to keep the legs in good repair. This leg is attached to the furniture item with a 5/16" hanger bolt. Attachment and removal of the leg are easy. The leg is simply turned to the right to install and to the left to remove. This wooden leg is beautifully finished in a Dark Walnut finish which highlights the grain beautifully. The wood is strong and durable and is equipped with a plastic glide on the bottom of the leg. Please be advised that there are two common sizes of Hanger Bolts. Please carefully check the hanger bolt size on your present leg to assure that your new legs will be compatible. Both your present leg and your new leg need to have the same size hanger bolt.  The most common size hanger bolt for American-made furniture is 5/16". For imported furniture, especially from Europe (Natuzzi, etc.), the larger Metric 10mm (M10) size is common. M8 size is often found and used for Ikea sofas and furniture. Note: Wood is a natural material, with naturally occurring variations in color, texture, and grain pattern. As a result, each couch leg may differ slightly from the photograph shown on the website. Make sure to measure your attachment point. Unsure of what size hanger bolt you need? Consider purchasing a Leg Daddy Hanger Bolt Fit Test Kit Set of 4 Legs
sale
Max 2500 Series Replacement Sleeper Sofa Mechanism with 5
Max 2500 Series Replacement Sleeper Sofa... from $889.00 $1,200.00
PLEASE BE AWARE: PER THE MANUFACTURER, THERE IS AN APPROX 6-WEEK LEAD TIME. You have probably heard about the "everything shortage," with many consumer and commercial goods being in short supply due to historic congestion at seaports, disruption in interstate shipping, and leading to increases in the cost of goods and shipping. At the same time, shipping carriers such as USPS, UPS, and FedEx are also raising their rates, suspending delivery date guarantees, and delaying service. This will only get worse. Our mechanisms are hand-crafted right here in High Point, NC, so we are not affected as much by these challenges. Still, the raw steel and spring stock we depend on continues to be unpredictable. Some components may be affected by the global shipping delays and supply shortages. Shipping orders out to you, our valued customers, can also be impacted by these and other factors. We have never encountered such problems in the thirty-one years we have been supplying the industry, but material shortages are possible this winter. Because of today's unpredictable realities, we are recommending that you place your mechanism order as quickly as possible to avoid delays. We appreciate your patience as we work through these challenges with our customers. Replace damaged, rusted, worn-out, or unsafe sleeper units with a new Made-in-USA Replacement Sleeper Sofa Mechanism which features round tubular construction that's safe, strong, well designed. When sleeper sofa mechanisms break, they can become uncomfortable, non-working, or worse, dangerous.  Wallace Flynn offers many different replacement sleeper sofa mechanisms. Repair it, don't replace it.  Please contact us before ordering to ensure proper sizing. The Max 2500 Series residential sofa sleeper system features engineered low-profile linkage to keep all metal parts below the mattress line. Its all-round tubular frame construction provides improved safety and comfort in the seated position. The Max 2500 Series from Wallace Flynn is a series of sofa sleeper mechanisms engineered with low-profile linkage to keep all metal parts below the mattress line. These mechanisms are easy to operate, and their all-round tubular frame construction provides a smooth and visually appealing look. The Max 2500 Series offers improved safety by eliminating pinch points, and the comfort in the seated position has been enhanced as well. When ordering a replacement mechanism for your sofa, finding the manufacturer and model number information for the existing mechanism is very important. This ensures that you receive the correct fit for replacement. This model replaces the Leggett and Platt 2500 Max Series mechanisms. Alternately, if the label is difficult to read, you can measure the distance between the brackets where the unit mounts into the wooden frame inside the sofa.  Please look for the Leggett model number sticker on your current mechanism and match it to the model number below. The model number of your current mechanism is the only accurate way to ensure a correct replacement. Please reference the chart below to find your model number. Available in the Following Widths: Size / Model 31" / 2531, 3125 40" / 2540, 4025 44" / 2544, 4425 48" / 2548, 4825 60" / 2560, 6025 67" / 2567, 6725 68" / 2568, 6825 Please contact us before ordering to ensure proper sizing.